Polycell Multi-Purpose Polyfilla Filler - 900gr is a high quality powder filler used for various jobs, even on large areas. When dry, this filler can be sanded and painted for a smooth and seamless finish. This filler is surface dry in approximately one hour and the high levels of added PVA stops this filler from shrinking or cracking. Versatile interior filler No cracking No shrinking Powder filler
Polycell Multi-Propose Exterior Polyfilla Filler - 1.75kg is a tough exterior filler suitable for all exterior filling jobs. This filler sets in 60 minutes to a grey weatherproof finish. When dry, this filler can be sanded and painted for a smooth and seamless finish and is able to accept nails or screws without cracking or breaking. The special formulation stops this filler from shrinking or cracking. Tough Sets in 60 minutes Weatherproof finish No Shrinking
For all indoor and outdoor repairs. Dries white and will not shrink or crack. Accepts nails and screws. Smooth and easy to sand. For Internal & External Use
TOUPRET Finish Filler is an easy to sand, ready-mixed filler for plasterboard finishing. It has an excellent finish and smooth application, and can be applied manually or with an airless spray machine. It can be applied to gypsum, old painted surfaces, cement, concrete, cellular concretend any type of butted or tapered plasterboard. There is no need to prime or seal the surface before application.Suitable for interior use. Overcoat with any filler, conventional paints and wall coverings.Conforms to BS EN 13963 for jointing applications. Code FGLIP20GB Surface condition Interior Task Jointing plasterboard Application method Manual Time between coats Second coat as soon as the filler is hard and dry to the touch. Surfaces Gypsum, old painted surfaces, cement, concrete, cellular concret and any type of butted or tapered plasterboard. Overcoat with Any type of filler, paint or wall coating. Maximum recommended application thickness Up to 5 mm. Mixing rate Ready to Use. Ready to paint time 12 to 24 Hours. Working time No limit. Application tools Putty knife. Blade. Trowel. Recommended temperature and humidity for application Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%. Adhesion Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa. Coverage g/m² (at 1mm thickness) 1700.00 IAQ (Indoor Air Quality) classification / Colour when dry White. Guarantee Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost. Clean tools with Water. Pack sizes Bucket 20 KG