Paint & Decor

Cuprinol 5 Year Ducksback has an advanced, wax enriched and non-drip formulation, that colours and weatherproofs sheds and fences for up to 5 years. Cuprinol 5-year Ducksback is quick drying, low odour and safe to use around plants and pets.

Cuprinol 5 Year Ducksback has an advanced, wax enriched and non-drip formulation, that colours and weatherproofs sheds and fences for up to 5 years. Cuprinol 5-year Ducksback is quick drying, low odour and safe to use around plants and pets.

Creates smooth layer for laying tiles or installing underfloor heating etc Can be used in wet rooms / bathrooms etc Ideal for renovating walls Ideal for Trades people and for DIY

Gyproc ProMix Finish is a lightweight, ready-to-use, air-drying, ready-mixed filler. Benefits Suitable for all stages of the jointing process Can be used either by hand or with mechanical jointing tools Extremely good workability for easy application Very low shrinkage Easy to sand to an excellent finish

Dust Sheet Cotton Twill 12ft X 9ft High quality dust sheet for domestic use made from 100% Cotton twill for long life. Absorbs paint splashes.

Bartoline Creocote is an oil-based wood treatment, effective when applied to exterior timbers. Its oil-based properties provide excellent surface water repellence, improve grain definition and restrict weather damage. Supplied in both traditional light and dark brown shades. Application: Rough cut exterior timbers such as garden sheds, fences and trellis work. For timbers being set in the ground, apply Bartoline Bitcote Bitumen Paint to protect against groundwater saturation. Coverage: 1 Litre will cover 6 – 8 square meters depending upon texture and porosity of the timber to be treated.

Fleetwood 1 Litre Undercoat - White Oil-based paint Recoat time: 2-4 Hour Touch dry: 30 minutes Up to 16 m2 per 1 litre For exterior and interior use Clean up with soap and water Size: 1 litre Colour: White

Dulux 750Ml Satinwood - Brilliant White Waterbased paint Up to up to 16m2/L coverage Drying time: 6hrs Satin Finish Size: 750ml Colour: Brilliant White

Dulux 750Ml Satinwood Water-Based - BrillIant White Waterbased paint Up to up to 12m2/L coverage (2coats) Drying time: 6hrs Satin Finish Size: 750ml

Polycell Advanced All in One Polyfilla Filler - 600ml is a high performance lightweight filler for all general interior repairs. This filler is quick drying and will not shrink or sag. It has been specially developed to allow the filling of holes up to 50mm deep in one go. This filler dries to a smooth finish meaning it requires no sanding prior to painting. Lightweight Quick drying No shrinking No sagging

Clear Binding Primer Base: Water Use: Interior & Exterior Clean tools with: Soap & Water Coverage: 12m² Drying time: Dries in 1hour. Paintable in 2 hours Container size: 1L

All Purpose Ready Mix Joint Compound is designed for taping, to finish joints and cornerbead, spot fasteners, skim and texture and repair cracks in plastered walls. Can also be used to texture surfaces and to laminate gypsum board to other surfaces such as masonry or other gypsum board. It contains sufficient binder to secure the reinforcing tape and develops its strength and hardness by drying. ADVANTAGES • Applies easily and provides excellent bond. • Stays strong – highly durable surface. • Lessens pocking and pinholing • Works great for first phases of finishing.

Dulux 750Ml Undercoat Water-Based BrillIant White Aquatech Primer Undercoat Water-based paint Size: 750ml Coverage: 16m2 per litre (2coats) Flat finish Drying Time: 1-2 Hours

Type: Wood, Metal and Furniture Paint Colour: Brilliant White Finish: Eggshell Interior and exterior use Touch dry: 30mins Recoat: 2-4hs Base: Water Clean with: Soapy Water Coverage: 16m²/litre Container Size: 500ml

Fleetwood Traditional Satinwood is a solvent based mid-sheen based enamel for interior and exterior surfaces. Formulated to give excellent flow and producing a hard wearing abrasion resistant washable finish.

Fleetwood Metal Shield is an interior/exterior high performance coating and metal finish ensuring long lasting protection against corrosion and extremes in weather. Ideal for metal, railings, lift shafts, gates and other metal surfaces. Benefits Made in Ireland Quick Drying 5 Year Anti Corrosive Protection Excellent Adhesion No Primer Required Can be applied to high heat upto 90 C

Fleetwood Metal Shield is an interior/exterior high performance coating and metal finish ensuring long lasting protection against corrosion and extremes in weather. Ideal for metal, railings, lift shafts, gates and other metal surfaces. Benefits Made in Ireland Quick Drying 5 Year Anti Corrosive Protection Excellent Adhesion No Primer Required Can be applied to high heat upto 90 C

Primer-Sealer Stain Killer Base: Water-based Use: Interior & Exterior Clean tools with: Soap & Water Coverage: 10m² Drying time: Dries in 30 minutes. Paintable in 1 hour Container size: 500ml

Universally applicable adhesive and sealant. All applications in construction, sanitary and general maintenance. Tec7 adheres to most surfaces and does not attack plastics. Safe to use on all materials, mirrors, natural stone, polystyrene, non-ferrous metals, most plastics, ... Can be used on damp surfaces, even submerged in water. Can be quickly painted over with most common paints (do not use with alkyd paints). Tec7 has less adhesion to PP, PE, PTFE, bitumen and silicone. Adhesion on PP is improved with the PT7 primer.

• Water based • Permanently blocks tough to banish markings caused by graffiti and ink • Sticks to all surfaces without sanding • The alkali nature of Pure Grip seals porous surfaces (from wooden to masonry/brick) • Primes all surfaces • Available in Pastel Shades • Touch dry in 30 mins with a recoat time of 1-2 hours. Hard dry in 1 day • Available in: 500ml, 1l, 2.5l & 5l